Wiper And Washer System: Precaution

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

PRECAUTION FOR WASHER NOZZLE (for 4 Way Type) HANDLING

Do not adjust the washer nozzle with a safety pin, etc. as the washer nozzle tip is made of resin and could be damaged. Be sure to use SST for adjustment.
SST 95060-10010

When the washer nozzle is clogged with wax, etc., do not use metal objects such as a safety pin to clean the washer nozzle hole. Be sure to use a soft resin brush, etc.

NOTE: For Initialization:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

REFERENCE CHART

System Name	Refer To
Power Window Control System Initialization	INITIALIZATION

NOTE:

When the warning light is illuminated or the battery has been disconnected and reconnected, pressing the power switch may not start the system on the first try. If so, press the power switch again.
With the power switch's power mode changed to ON (IG), disconnect the battery. If the key is not in the key slot during reconnection, DTC B2799 may be output.