Battery Plug: Inspection

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT BATTERY PLUG
1. Check the resistance.
  1. Measure the resistance between the terminals.
    Standard resistance:
    
    10 kΩ or higher
    
    If the result is not as specified, replace the battery plug.
    
    Fig 1: Measuring Resistance Between Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the service plug grip to the socket.
  3. Measure the resistance between the terminals.
    Standard resistance:
    
    Below 1 Ω
    
    If the result is not as specified, replace the battery plug.
    
    Fig 2: Measuring Resistance Between Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002