Blower Unit: Reassembly

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CLEAN AIR FILTER
1. Install the clean air filter to the air filter cover plate.
2. Attach the 2 claws to install the air filter cover.
  
  Fig 1: Installing Clean Air Filter
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BLOWER WITH FAN MOTOR SUBASSEMBLY
1. Install the blower with fan motor with the 3 screws.
  
  Fig 2: Installing Blower With Fan Motor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 COOLER WIRING HARNESS SUBASSEMBLY
1. Install the No. 2 cooler wiring harness to the blower with fan motor.
  
  Fig 3: Installing No 2 Cooler Wiring Harness To Blower With Fan Motor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the blower motor cover with the 5 screws.
  
  Fig 4: Installing Blower Motor Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BLOWER MOTOR CONTROL
1. Install the blower motor control with the 2 screws.
2. Connect the connector.
  
  Fig 5: Installing Blower Motor Control
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR INLET SERVO MOTOR
1. Install the air inlet servo motor with the 3 screws.
  
  Fig 6: Installing Air Inlet Servo Motor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002