LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Brake Control System - Hybrid) >> Skid Control Ecu >> Removal

Skid Control Ecu: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL INSERT SUB-ASSEMBLY LOWER LH  (See REMOVAL )
  6. REMOVE SKID CONTROL ECU 
    1. Disconnect the skid control ECU connectors.
      Fig 1: Locating Skid Control ECU Connectors
      G05202840Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and skid control ECU.
      Fig 2: Identifying Nuts And Skid Control ECU
      G05202841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals