LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Brake Control System - Hybrid) >> Brake Control Power Supply >> Inspection

Brake Control Power Supply: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT BRAKE CONTROL POWER SUPPLY 
    1. Inspect the brake control power supply. If any of the following occurs, replace with a new brake control power supply:
      • The surface of the brake control power supply is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The brake control power supply has been dropped.
scientia non olet · About LEMON Manuals