LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2AZ-FE) (Except Hybrid) >> Accelerator Pedal Rod >> Installation

Accelerator Pedal Rod: Installation

  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Install the pedal rod with the 2 bolts.

      Torque: 4.9 Nm (50 kgf*cm, 43 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
      Fig 1: Locating Bolts On Pedal Rod
      G05245500Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals