System Outline

The moon roof can be operated when the ignition SW is turned to ON position.

1. Slide Open Operation 

   The moon roof fully opens automatically by pressing the SLIDE OPEN button of the overhead J/B once. If the sliding roof control switch is pressed again when the moon roof is operating, the movement of the moon roof stops. The operation of SLIDE OPEN is not worked when the moon roof at TILT UP position.

2. Slide Close Operation 

   If you keep pressing the TILT UP button of the overhead J/B when the moon roof is open, the moon roof closes half and stops the operation once. If you keep pressing the TILT UP once again, the moon roof fully closes.

3. Tilt Up Operation 

   If you press the TILT UP button of the overhead J/B, the moon roof is tilted up. However, the moon roof is not tilted up when it is open

4. Tilt Down Operation 

   If you press the SLIDE OPEN button when the TILT UP of the overhead J/B is pressed, the moon roof is tilted down.

5. Key Off Moon Roof Operation 

   When the ignition SW is turned from ON position to OFF or ACC position, the moon roof can be operated within about 40 seconds. However, even if it is within about 40 seconds, the moon roof can not be operated when each of the front doors opens.