Unlock Warning Switch: Inspection
- INSPECT UNLOCK WARNING SWITCH
- Check the resistance.
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in RESISTANCE SPECIFICATION TABLE .
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
RESISTANCE SPECIFICATION TABLETester Connection Condition Specified Condition 1-2 Pin released 10 kΩ or higher 1-2 Pin pushed in Below 1 Ω If the result is not as specified, replace the unlock warning switch.
- Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in RESISTANCE SPECIFICATION TABLE .
- Check the resistance.