Park/Neutral Position Switch: Installation

1. Install the park/neutral position switch onto the manual valve shaft.
2. Temporarily install the bolt.
3. Install a new lock washer and the nut.

   Torque: 6.9 N*m (70 kgf*cm, 61 in.*lbf) 

   Fig 1: Identifying Park/Neutral Position Switch Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Push the control shaft rearward as much as possible.
5. Return the control shaft lever 2 notches to the N position.
   Fig 2: Identifying Control Shaft Lever N Position

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Align the neutral basic line with the switch groove, and tighten the bolt.

   Torque: 13 N*m (129 kgf*cm, 9.4 ft.*lbf) 

   Fig 3: Aligning Neutral Basic Line With Switch Groove

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. Using a screwdriver, bend the tabs of the lock washer.

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

(See INITIALIZATION  )