Park/Neutral Position Switch: Inspection

INSPECT PARK/NEUTRAL POSITION SWITCH

Measure the resistance of the PNP switch when the shift lever is moved to each position.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION TABLE

Tester Connection	Shift Lever Position	Specified Condition
4 (B) - 5 (L)	P or N	Below 1 Ω
4 (B) - 5 (L)	Except P and N	10 kΩ or higher
1 (RL) - 2 (RB)	R	Below 1 Ω
1 (RL) - 2 (RB)	Except R	10 kΩ or higher
2 (RB) - 7 (DL)	D	Below 1 Ω
2 (RB) - 7 (DL)	Except D	10 kΩ or higher
2 (RB) - 3 (2L)	2	Below 1 Ω
2 (RB) - 3 (2L)	Except 2	10 kΩ or higher
2 (RB) - 8 (LL)	L	Below 1 Ω
2 (RB) - 8 (LL)	Except L	10 kΩ or higher

Fig 1: Identifying PNP Switch Connector Terminals

G05197101

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002