Rear Seat Inner Belt Assembly: Installation

INSTALL REAR SEAT INNER BELT ASSEMBLY
1. for RH Side:
  1. Align the jam hole in the anchor plate of the rear seat inner belt with the stud bolt of the body and provisionally install the anchor plate.
  2. Install the anchor plate of the rear center seat inner belt with the bolt.
    
    Fig 1: Aligning Jam Hole In Anchor Plate Of Rear Seat Inner Belt (RH Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
    
    NOTE: Do not place the anchor plate over the convex areas of the rear seat inner belt
  3. Install the buckle into the rear seatback pocket.
  4. Install the rear seat cushion.
2. for LH Side:
  1. Align the jam hole in the anchor plate of the rear seat inner belt with the stud bolt of the body and provisionally install the anchor plate.
    
    Fig 2: Aligning Jam Hole In Anchor Plate Of Rear Seat Inner Belt (LH Side)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the anchor plate of the rear center seat inner belt with the bolt.
    Torque: 42 N*m (430 kgf*cm, 31 ft.*lbf)
    
    NOTE: Do not place the anchor plate over the convex areas of the rear seat inner belt.
  3. Install the buckle into the rear seatback band.
  4. Install the rear seat cushion.