Oil Pump: Reassembly

INSTALL OIL PUMP RELIEF VALVE
1. Coat the relief valve with engine oil and insert the relief valve and spring into the valve hole.
2. Install the relief valve plug.
  Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
INSTALL OIL PUMP COVER
1. Apply fresh engine oil to the drive and driven rotors.
2. Place the drive and driven rotors into the timing chain cover with the marks facing the oil pump cover side.
  
  Fig 1: Identifying Marks On Oil Pump Rotor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the oil pump cover with the 7 bolts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  Fig 2: Identifying Oil Pump Cover Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install a new O-ring onto the oil pump cover.
5. Install a new O-ring onto the oil pipe.
6. Install the oil pipe with the 3 bolts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  Fig 3: Identifying Oil Pipe Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002