LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System >> Heated Oxygen Sensor >> Inspection

Heated Oxygen Sensor: Inspection

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        HEATED OXYGEN SENSOR

        Tester Connection Specified Condition
        1 (HT) - 2 (+B) 11 to 16 Ω at 20°C (68°F)
        1 (HT) - 4 (E) 10 kΩ or higher
        Fig 1: Measuring Resistance Between Terminals Using Ohmmeter
        G05109782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals