Transmitter Battery: Removal

REMOVE TRANSMITTER BATTERY
1. Remove the transmitter battery.
  1. Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter case.
    NOTE: Do not use excessive force when prying apart the transmitter case.
    
    Fig 1: Prying Transmitter Case Using Screwdriver
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Remove the battery (lithium battery: CR2016).
    NOTE:
    Do not push the terminals with your finger.
    
    Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.
    
    Do not touch the battery with wet hands. Water may cause rust.
    
    Do not touch or move any components inside the transmitter as this may interfere with its proper operation.
    
    Fig 2: Identifying Transmitter Battery
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002