Clutch Switch: Inspection

INSPECT CLUTCH SWITCH

Remove the clutch switch.

Fig 1: Identifying Clutch Switch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Measure the resistance and check that the results in accordance with the value(s) in CLUTCH SWITCH .

Standard resistance

CLUTCH SWITCH

Tester Connection	Condition	Specified Condition
1 - 2	Switch pin released (Clutch pedal depressed)	10 kΩ or higher
1 - 2	Switch pin pushed In (Clutch pedal released)	Below 1Ω

If the result is not as specified, replace the clutch switch.