Rear Wheel Alignment: Adjustment

HINT:

See INSPECTION

If the toe-in is not within the specified range, inspect the suspension parts and replace parts if necessary.

1. Inspect the toe-in.

   Toe-in: 

   USA, Canada 

   TOE-IN SPECIFICATIONS (USA, CANADA)
   
   

   Tire size	Toe-In (total)
   P195/65R15	A + B: 0°16' +-16' (0.26° +- 0.26°) C - D: 2.6 +- 2.5 mm (0.10 +- 0.10 in.)
   P185/65R15	A + B: 0°15' +-15' (0.25° +- 0.25°) C - D: 2.5 +- 2.5 mm (0.10 +- 0.10 in.)
   195/55R16	A + B: 0°20' +-15' (0.34° +- 0.25°) C - D: 3.4 +- 2.5 mm (0.13 +- 0.10 in.)

   Fig 1: Inspecting Toe-In

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Mexico 

   TOE-IN SPECIFICATIONS (MEXICO)
   
   

   Tire size	Toe-in (total)
   P195/65R15	A + B: 0°10' +-16' (0.18° +- 0.26°) C - D: 1.8 +- 2.5 mm (0.07 +- 0.10 In.)

   HINT:

   • Measure "C - D" only when "A + B" cannot be measured.
   • If toe-in is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary.

1. Install a camber-caster-kingpin gauge or put the wheels on a wheel alignment tester.
2. Inspect the camber.
   Fig 2: Inspecting Camber

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Camber: 

   USA, Canada 

   CAMBER SPECIFICATIONS (USA, CANADA)
   
   

   Tire size	Camber	Right-left error
   P195/65R15 P185/65R15	-1°27' +- 30' (-1.45°+-0.5°)	30' (0.5°) or less
   195/55R16	-1°28' +- 30' (-1.47°+-0.5°)	30' (0.5°) or less

   Mexico 

   CAMBER SPECIFICATIONS (MEXICO)
   
   

   Tire size	Camber	Right-left error
   P195/65R15	-1°26' +- 30' (-1.43°+-0.5°)	30' (0.5°) or less

   HINT:

   Camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary.