Front Stabilizer Bar: Removal

REMOVE FRONT WHEEL
REMOVE FRONT STABILIZER LINK ASSEMBLY LH
1. Remove the 2 nuts and stabilizer bar link.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.
  
  Fig 1: Locating Stabilizer Bar Link Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT:

Remove the RH side by the same procedure as the LH side.
SEPARATE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO. 1 LH
HINT:

See REMOVAL
SEPARATE FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO. 1 RH
HINT:

Remove the RH side by the same procedure as the LH side.
SEPARATE RACK AND PINION POWER STEERING GEAR ASSEMBLY
HINT:

See REMOVAL
SUSPEND ENGINE ASSEMBLY
1. For automatic transaxle: See REMOVAL .
2. For manual transaxle: See REMOVAL .
SEPARATE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (see REMOVAL )
REMOVE STABILIZER BAR FRONT
1. Remove the 4 bolts, front stabilizer bracket No. 1 LH, front stabilizer bracket No. 1 RH, 2 front stabilizer bar bushes No. 1 and stabilizer bar front from the front suspension crossmember sub-assembly.