LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla LE, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER 
    1. Fully extend the front shock absorber rod.
    2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.
    CAUTION:
    • Be careful when drilling because shards of metal may fly about, so always use proper safety equipment.
    • The gas is colorless, odorless, and non-poisonous.
    Fig 1: Measuring Hole In Cylinder Between A And B
    G05194650Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals