How To Proceed With Troubleshooting

The intelligent tester can be used in steps  4,  6,  8 and  9.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS 
   1. Confirm problem symptoms (See HOW TO PROCEED WITH TROUBLESHOOTING )
3. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 
4. DTCs CHECK (Present and Past DTCs) 
   1. Check for DTCs.

   Result 

   RESULT
   
   

   Result	Proceed to
   DTC is output.	A
   DTC is not output.	B

   B:  GO TO PROBLEM SYMPTOMS TABLE 

   A: GO TO Next Step 

5. DTCs CHART 
6. CIRCUIT INSPECTION 
7. REPAIR 
8. CLEAR DTCs (Present and Past DTCs) 
   1. Clear DTCs.
9. DTCs CHECK (Present and Past DTCs) 
   1. Check for DTCs.

   Result 

   RESULT
   
   

   Result	Proceed to
   DTC is not output.	A
   DTC is output.	B

   B:  GO TO step  5

   A: GO TO Next Step 

10. SYMPTOM SIMULATION 
    1. Check the passenger airbag ON/OFF indicator condition.

    Result 

    RESULT
    
    

    Result	Proceed to
    Passenger airbag ON/OFF indicator is operating normally.	A
    Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on.	B

    B:  GO TO step  5

    A: GO TO Next Step 

11. CONFIRMATION TEST 

    NEXT: END