Accelerator Pedal ASSY (1ZZ-FE): Replacement

WARNING: This page is about a different car, the 2006 Toyota Corolla and 2005 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT BATTERY NEGATIVE TERMINAL
REMOVE ACCELERATOR PEDAL ASSY
1. Disconnect the accelerator position sensor connector.
2. Remove the 2 bolts, then remove the accelerator pedal.
Fig 1: Removing 2 Bolts And Accelerator Pedal
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ACCELERATOR PEDAL ASSY
1. Install the accelerator pedal with the 2 bolts.
  Torque: 5.4 N.m (55 kgf.cm, 48 In. lbf)
2. Connect the accelerator position sensor connector.
Fig 2: Installing Accelerator Pedal With 2 Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT BATTERY NEGATIVE TERMINAL
Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf)