LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla LE, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer >> Engine Immobilizer System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the intelligent tester to the Controller Area Network Vehicle Interface Module (CAN VIM). Then connect the CAN VIM to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

    Fig 1: Connecting Intelligent Tester To DLC3
    G05195876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Erase the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

scientia non olet · About LEMON Manuals