LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Shock Absorber >> Disposal

Rear Shock Absorber: Disposal

  1. DISPOSE OF SHOCK ABSORBER ASSEMBLY REAR LH 
    1. Fully extend the shock absorber rod.
    2. Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside the cylinder.
    CAUTION:
    • When drilling, since the fragments may fly out, work carefully.
    • The discharged gas is colorless, odorless and non-poisonous.
    Fig 1: Disposing Shock Absorber Assembly Rear LH
    G05194691Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals