LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (1ZZ-FE) >> Ignition Switch >> Removal

Ignition Switch: Removal

  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE STEERING COLUMN COVER LWR 
    1. Remove the 3 screws, then remove the steering column cover LWR.
      2. Fig 1: Identifying Steering Column Cover LWR Screws
      G05193476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Disconnect the ignition switch connector and unlock warning switch connector.
      2. Fig 2: Locating Ignition Switch And Unlock Warning Switch Connectors
      G05193477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the unlock warning switch connector from the ignition switch assembly.
      3. Fig 3: Locating Unlock Warning Switch Connector
      G05193478Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the wire harness from the steering assembly.
      4. Fig 4: Locating Wire Harness
      G05193479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 2 screws, then remove the ignition switch assembly.
      5. Fig 5: Locating Ignition Switch Assembly Screws
      G05193480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals