LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Corolla CE, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (1ZZ-FE) >> Ignition Switch >> Installation

Ignition Switch: Installation

  1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY 
    1. Install the ignition switch assembly with the 2 screws.
      2. Fig 1: Locating Ignition Switch Assembly Screws
      G05193480Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the wire harness to the steering assembly.
      3. Fig 2: Locating Wire Harness
      G05193479Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the unlock warning switch connector to the ignition switch assembly.
      4. Fig 3: Locating Unlock Warning Switch Connector
      G05193478Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the ignition switch connector and unlock warning switch connector.
      5. Fig 4: Locating Ignition Switch And Unlock Warning Switch Connectors
      G05193477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING COLUMN COVER LWR 
    1. Install the steering column cover LWR with the 3 screws.
      2. Fig 5: Locating Steering Column Cover LWR Screws
      G05193486Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. CONNECT BATTERY NEGATIVE TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

scientia non olet · About LEMON Manuals