Rear Axle Hub: Removal

HINT:

• Using the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. REMOVE REAR WHEEL 
2. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY 
3. DISCONNECT SKID CONTROL SENSOR WIRE (w/ ABS) 
4. REMOVE REAR AXLE HUB & BEARING ASSEMBLY LH 
   1. Remove the 4 bolts and hub & bearing assembly LH.
   Fig 1: Locating Hub And Bearing Assembly LH Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002