Rear Strut Rod: Removal

HINT:

See COMPONENTS 

1. REMOVE REAR WHEEL 
2. REMOVE REAR STRUT ROD ASSEMBLY 
   1. Remove the bolt and separate the parking brake cable.
      Fig 1: Locating Parking Brake Cable With Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and nut and disconnect the strut rod (front side).
      NOTE: When removing the bolt, keep the nut from rotating.
      Fig 2: Locating Strut Rod (Front Side) With Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Remove the bolt, nut and strut rod from the rear axle carrier.
      NOTE: When removing the bolt, keep the nut from rotating.
      Fig 3: Locating Strut Rod Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002