LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Camry Solara SLE, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Control System (2AZ-FE)) >> SFI System >> DTC P0607 Control Module Performance >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different variant/trim than selected.
  1. CHECK WHETHER DTC OUTPUT RECURS (DTC P0607) 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch to the ON position and turn the tester on.
    3. Clear the DTC (See DTC CHECK/CLEAR  ).
    4. Turn the ignition switch off and turn the tester off.
    5. Disconnect the battery negative terminal and wait for 1 minute.
    6. Connect the battery negative terminal.
    7. Turn the ignition switch to the ON position and turn the tester on.
    8. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
    9. Read the DTCs.

      Result 

      DTC RESULT REFERENCE

      Display (DTC output) Proceed to
      P0607 A
      No output B

    B: CHECK FOR INTERMITTENT PROBLEMS 

    A: REPLACE ECM 

scientia non olet · About LEMON Manuals