Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

DRAIN ENGINE COOLANT
HINT:

See COOLANT
REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
REMOVE THROTTLE BODY ASSEMBLY
HINT:

See REMOVAL .
REMOVE INTAKE MANIFOLD
1. Remove the 5 bolts, 2 nuts, intake manifold and gasket.
  
  Fig 1: Locating Gasket And Intake Manifold With Bolts And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE KNOCK SENSOR
1. Disconnect the knock sensor connector.
2. Remove the nut and knock sensor.
  
  Fig 2: Identifying Knock Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002