Installation (2006/03-2006/10)

INSTALL CAMSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring of the sensor.
  NOTE: Make sure that the O-ring is not cracked or jammed when installing it.
  
  Fig 1: Identifying O-Ring Of Camshaft Position Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft position sensor with the bolt.
  
  Fig 2: Identifying Camshaft Position Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
3. Connect the camshaft position sensor connector.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION (2006/03-2006/10) )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL (2006/03-2006/10) )
INSTALL AIR CLEANER INLET ASSEMBLY (See INSTALLATION (2006/03-2006/10) )
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION (2006/03-2006/10) )