LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Camry CE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Engine Control System (Hybrid)) >> Circuit Opening Relay >> Inspection

Circuit Opening Relay: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT CIRCUIT OPENING RELAY 
    1. Using an ohmmeter, measure the resistance according to the value(s) in STANDARD RESISTANCE TABLE .

      Standard resistance 

      STANDARD RESISTANCE TABLE

      Tester Connection Specified Condition
      1E-7-1E-13 10 kΩ or higher
      1E-7-1E-13 Below 1 Ω (Battery voltage is applied between terminals 1E-8 and 1D-12)
      Fig 1: Identifying Circuit Opening Relay Connector Terminals
      G05008064Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals