Rear Stabilizer Bar: Installation

1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar as shown in the illustration.

Fig 1: Installing Rear Stabilizer Bushings

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the No. 2 rear stabilizer bar bracket.

1. Install the No. 1 rear stabilizer bar bracket.

1. Install the rear stabilizer bar with the 2 bolts. (LH Side)

   Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

   Fig 2: Locating Rear Stabilizer Bar With Bolts (LH Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rear stabilizer bar with the 2 bolts. (RH Side)

   Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

Fig 3: Locating Rear Stabilizer Bar With Bolts (RH Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the rear stabilizer link assembly LH with the nut.

   Torque: 39 N*m (400 kgf*cm, 29 ft.*lbf) 

   HINT:

   If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

Fig 4: Installing Rear Stabilizer Link Assembly LH

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

Perform the same procedures as for the LH side.

Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)