Fuel Pressure Pulsation Damper: Removal

1. PREVENT GASOLINE FROM SPILLING OUT 
2. DISCONNECT BATTERY NEGATIVE TERMINAL 
3. DRAIN ENGINE COOLANT  (See REPLACEMENT )
4. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH  (See REMOVAL )
5. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
6. REMOVE COWL TOP VENTILATOR LOUVER RH  (See REMOVAL )
7. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSEMBLY  (See REMOVAL )
8. REMOVE COWL TOP PANEL OUTER  (See REMOVAL )
9. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
10. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE  (See REMOVAL )
11. REMOVE INTAKE AIR SURGE TANK  (See REMOVAL )
12. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY 
    1. Remove the clip.
    2. Pull out the fuel pressure pulsation damper from the fuel delivery pipe.

Fig 1: Removing Fuel Pressure Pulsation Damper

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002