IGNITION SWITCH (w/o Smart Key System): Inspection

1. Measure the switch resistance.
   Fig 1: Inspecting Stater Switch Assembly

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Resistance 

   RESISTANCE SPECIFICATION
   
   

   Switch Condition	Tester Connection	Specified Condition
   LOCK	-	10 kΩ or higher
   ACC	1 (ST1) - 3 (ACC)	Below 1 Ω
   ON	1 (ST1) - 2 (AM1) 1 (ST1) - 3 (ACC) 5 (IG2) - 6 (AM2)	Below 1 Ω
   START	1 (ST1) - 2 (AM1) 4 (IG1) - 5 (IG2) 5 (IG2) - 6 (AM2)	Below 1 Ω

If the result is not as specified, replace the ignition or starter switch assembly.