Front Axle Hub: Reassembly

INSTALL FRONT AXLE HUB LH BEARING
1. Using SST and a press, install a new front axle hub LH bearing to the steering knuckle LH.
  SST 09950-60020 (09951 -00810), 09950-70010 (09951-07100)
  
  Fig 1: Installing Front Axle Hub LH Bearing To Steering Knuckle
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER BALL JOINT ASSEMBLY FRONT LH (See INSTALLATION )
INSTALL DISC BRAKE DUST COVER FRONT LH
1. Place the disc brake dust cover front LH and use a torx wrench (T30) to torque the 4 bolts.
  Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH
1. Using SST and a press, install the front axle hub sub-assembly LH.
  SST 09608-32010, 09950-60020 (09951 -00810), 09950-70010 (09951-07100)
Fig 2: Installing Front Axle Hub Sub-Assembly LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB LH HOLE SNAP RING
1. Using snap ring pliers, install a new front axle hub LH hole snap ring.
Fig 3: Installing Front Axle Hub LH Hole Snap Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH
1. Using SST and a hammer, install a new bearing dust deflector No. 1 LH.
  SST 09316-60011 (09316-00011, 09316-00031), 09608-32010
  
  HINT:
  
  Align the hole for the speed sensor in the bearing dust deflector No.1 LH with the steering knuckle.
Fig 4: Installing Bearing Dust Deflector No.1 LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002