Front Axle Hub: Disassembly

REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH
1. Using a screwdriver, remove the front wheel bearing dust deflector No.1 LH.
Fig 1: Removing Front Wheel Bearing Dust Deflector No.1 LH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE HUB LH HOLE SNAP RING
1. Using snap ring pliers, remove the front axle hub LH hole snap ring.
Fig 2: Removing Front Axle Hub LH Hole Snap Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH
1. Using SST, remove the front axle hub sub-assembly LH.
  SST 09520-00031
  
  Fig 3: Removing Front Axle Hub Sub-Assembly LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a press, remove the bearing inner race (outside) from the front axle hub sub-assembly LH.
  SST 09950-00020, 09950-60010 (09951-00430), 09950-70010 (09951-07100)
  
  Fig 4: Removing Bearing Inner Race From Front Axle Hub Sub-Assembly LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DISC BRAKE DUST COVER FRONT LH
1. Using a torx wrench (T30), remove the 4 bolts and disc brake dust cover front LH.
REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH (See REMOVAL )
REMOVE FRONT AXLE HUB LH BEARING
1. Place the bearing inner race (outside) on the front axle hub LH bearing.
2. Using SST and a press, press the front axle hub LH bearing until it comes into contact with the SST.
  SST 09527-17011, 09950-60010 (09951 -00600), 09950-70010 (09951-07100)
  
  Fig 5: Pressing Front Axle Hub LH Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a wrench to make the steering knuckle LH horizontal, fix it to the V block, as shown in the illustration.
  NOTE: Be sure steering knuckle is horizontally positioned.
  
  Fig 6: Fixing Steering Knuckle LH To V Block
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using SST and a press, remove the front axle hub LH bearing.
  SST 09950-60010 (09951 -00600), 09950-70010 (09951-07100)