Data List / Active Test

HINT:

Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch on (IG).
3. Read the DATA LIST on the tester's screen.

   Bogy ECU: 

   DATA LIST REFERENCE CHART
   
   

   Item	Measurement Item/Display (Range)	Normal Condition	Diagnostic Note
   TRUNK KEY UNLK	Trunk key switch signal/ON or OFF	ON: Trunk is unlocked OFF: Trunk is locked	-
   LUGG COURTESY SW	Luggage courtesy switch signal/ON or OFF	ON: Luggage courtesy switch is open OFF: Luggage courtesy switch is closed	-
   D DOR CTY SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed	-
   P DOR CTY SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed	-
   Rr DOR CTY SW	Door courtesy switch signal/ON or OFF	ON: Door is open OFF: Door is closed	-
   Dr LOCK POS SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked	-
   P LOCK POS SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked	-
   Rr LOCK POS SW	Door unlock detection switch signal/ON or OFF	ON: Door is unlocked OFF: Door is locked	-
   D/L SW-LOCK	Door lock switch signal (LOCK)/ON or OFF	ON: Door is locked OFF: Door is unlocked	-
   D/L SW-UNLOCK	Door lock switch signal (UNLOCK)/ON or OFF	ON: Door is unlocked OFF: Door is locked	-
   DOR KEY SW-LOCK	Door key lock and unlock switch signal/ON or OFF	ON: Door key is locked OFF: Door key is unlocked	-
   P DOR KEY SW-UL	Door key lock and unlock switch signal (Front passenger)/ON or OFF	ON: Door key is unlocked OFF: Door key is locked	-
   D DOR KEY SW-UL	Door key lock and unlock switch signal (Driver)/ON or OFF	ON: Door key is unlocked OFF: Door key is locked	-

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch on (IG).
3. Perform the ACTIVE TEST according to the display on the tester.

   Body ECU: 

   DATA LIST REFERENCE CHART
   
   

   Item	Test Details	Diagnostic Note
   DOOR LOCK	Operate door lock motor LOCK/UNLOCK	-
   SHOCK UNLOCK	Operate door lock motor UNLOCK/OFF	-