Roof Headlining: Installation

INSTALL FRONT PILLAR GARNISH LH
1. Install the new clip (A).
2. Engage the 2 clips to install the front pillar garnish LH.
Fig 1: Identifying Front Pillar Garnish Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT PILLAR GARNISH RH
HINT:

Installation of the front pillar garnish RH is the same as the front pillar garnish LH.
INSTALL REAR OUTER SEAT BELT ASSEMBLY (See INSTALLATION )
INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (See INSTALLATION )
INSTALL REAR OUTER SEAT BELT ASSEMBLY (See INSTALLATION )
INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH
1. Install the new metal clip (B).
2. Engage the 4 clips to install the roof side garnish assembly inner LH.
Fig 2: Identifying Roof Side Garnish Assembly Inner Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
HINT:

Installation of the roof side garnish assembly inner RH is the same as the roof side garnish assembly inner LH.
CENTER SPIRAL CABLE (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSTALL HORN BUTTON ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH
1. Install the front seat outer belt assembly RH with the bolt.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
1. Install the front seat outer belt assembly LH with the bolt.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
INSTALL REAR SEATBACK ASSEMBLY SE-77
INSTALL FRONT SEAT ASSEMBLY RH (See INSTALLATION )
INSTALL FRONT SEAT ASSEMBLY LH (See INSTALLATION )
CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Some systems need initialization when disconnecting the cable from the negative battery terminal.
  HINT:
  
  See INITIALIZATION
INSPECT STEERING PAD
HINT:

See ON-VEHICLE INSPECTION
INSPECT SRS WARNING LIGHT
HINT:

See DIAGNOSIS SYSTEM