Network Gateway Ecu: Removal

TABLE OF BOLT, SCREW AND NUT (See REMOVAL )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (w/ Front Passenger Airbag)
HINT:

Refer to the procedures up to the removal of the instrument panel safety pad sub-assembly (w/ front passenger airbag) (See REMOVAL ).
REMOVE NETWORK GATEWAY ECU
1. Disconnect the connector.
2. Disengage the 2 claw and remove the ECU aggregation cover No. 1.
  
  Fig 1: Identifying ECU Aggregation Cover No. 1 Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the network gateway ECU assembly as shown in the illustration.
Fig 2: Locating Network Gateway ECU Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002