Service Data
1GR-FE STARTING - SERVICE DATA
| Starter (1.6 kW type) | ||
| Rated voltage and output power | 12 V 1.6 kW | |
| No-load characteristics | Current | 90 A or less at 11.5 V |
| Starter armature assembly | ||
| Commutator length | Standard | 3.1 mm (0.122 in.) |
| Minimum | 3.8 mm (0.150 in.) | |
| Starter commutator end frame assembly | ||
| Brush holder length | Standard | 9.0 mm (0.354 in.) |
| Minimum | 4.0 mm (0.158 in.) | |
| Starter armature assembly | ||
| Snap ring length | Maximum | 5.0 mm (0.197 in.) |
| Starter (2.0 kW type) | ||
| Rated voltage and output power | 12 V 2.0 kW | |
| No-load characteristics | Current | 100 A or less at 11.5 V |
| Starter armature assembly | ||
| Circle runout | Maximum | 0.05 mm (0.0020 in.) |
| Commutator diameter | Standard | 35.0 mm (1.378 in.) |
| Minimum | 34.0 mm (1.339 in.) | |
| Undercut depth | Standard | 0.7 mm (0.028 in.) |
| Minimum | 0.2 mm (0.008 in.) | |
| Starter yoke | ||
| Shunt coil resistance | at 20°C (68°F) | 1.5 to 1.9 Ω |
| Brush | ||
| Brush length | Standard | 15.0 mm (0.591 in.) |
| Minimum | 9.0 mm (0.354 in.) | |
| Starter brush holder assembly | ||
| Brush spring load | Standard | 21.5 to 27.5 N (2.2 to 2.8 kgf, 4.8 to 6.2 lbf) |
| Minimum | 12.7 N (1.3 kgf, 2.9 lbf) | |
| Starter relay assembly | ||
| Specified condition | 1 - 2 | Continuity |
| 3-5 | No continuity | |