LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2UZ-FE) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  2. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE FAN AND GENERATOR V BELT  (See REMOVAL )
  4. REMOVE OIL COOLER PIPE  (See REMOVAL )
  5. REMOVE TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH  (See REMOVAL )
  6. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
      Fig 1: Locating Camshaft Position Sensor Bolt And Stud Bolt
      G04968214Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt, stud bolt and camshaft position sensor.
scientia non olet · About LEMON Manuals