LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tundra Base, 4.0 U, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> SFI System (1GR-FE) >> Throttle Body >> Removal

Throttle Body: Removal

  1. DRAIN ENGINE COOLANT 
  2. REMOVE V-BANK COVER 
  3. REMOVE AIR CLEANER (See  REMOVAL  ) 
  4. DISCONNECT WATER BY-PASS HOSE NO.5 
    Fig 1: Disconnecting Water By-Pass Hose No.5
    G02636152Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT WATER BY-PASS HOSE NO.4 
    Fig 2: Disconnecting Water By-Pass Hose No.4
    G02636153Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE THROTTLE BODY 
    1. Disconnect the throttle motor connector.
    2. Remove the 4 bolts, throttle body and gasket.
    Fig 3: Removing 4 Bolts, Throttle Body And Gasket
    G02636154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals