LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma X-Runner >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (2TR-FE)) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
    2. Remove the 2 bolts, then remove the accelerator pedal.
      Fig 1: Removing Accelerator Pedal & Bolts
      G04407943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals