Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
E351 MANUAL TRANSAXLE TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Floor shift lever assembly at Body | 12 | 122 | 9 | |
| Floor shift cable transmission control shift clamp at Body | 5.0 | 51 | 44 in.*lbf | |
| Floor shift cable transmission control shift retainer at Body | 5.0 | 51 | 44 in.*lbf | |
| Clutch tube bracket set bolt | 17 | 173 | 13 | |
| Reverse idler gear shaft bolt | 30 | 306 | 22 | |
| Gear shift fork No.3 shift fork bolt | 24 | 244 | 17 | |
| Manual transmission output shaft rear set nut | 123 | 1,250 | 90 | |
| Control shaft cover set bolt | 20 | 204 | 15 | |
| Control shift lever at Shift and select lever shaft | 6.4 | 65 | 57 in.*lbf | |
| Selecting bellcrank assembly at Manual transmission case | 20 | 200 | 14 | |
| Release fork support at manual transaxle case | 47 | 480 | 35 | |
| Manual transaxle at Engine | Bolt A | 64 | 653 | 47 |
| Bolt B | 46 | 470 | 34 | |
| Bolt C | 44 | 449 | 32 | |
| Engine mounting insulator LH at Manual transaxle | 64 | 653 | 47 | |
| Exhaust pipe support bracket No.1 set bolt | 19 | 194 | 14 | |
| Manual transmission case protector at Manual transaxle | 18 | 184 | 13 | |
| Engine mounting bracket FR at Manual transaxle | 64 | 653 | 47 | |
| Starter assembly at Manual transaxle | 39 | 398 | 29 | |
| Wire harness clamp bracket at Manual transaxle | 8.4 | 86 | 74 in.*lbf | |
| Engine wire No.3 at Manual transaxle | 12 | 120 | 9 | |
| Transmission case at Manual transaxle case | 29 | 296 | 21 | |
| Manual transaxle case at Transmission case | 29 | 296 | 21 | |
| Bearing retainer rear at Transmission case | 43 | 438 | 32 | |
| Manual transaxle case receiver at Manual transaxle case | 7 | 71 | 62 in.*lbf | |
| Gear shift head No.1 at Gear shift fork shaft No.2 | 24 | 245 | 18 | |
| Gear shift fork No.1 at Gear shift fork shaft No.1 | 24 | 245 | 18 | |
| Reverse shift arm bracket at Manual transaxle case | 17 | 173 | 13 | |
| Reverse restrict pin plug at Transmission case | 13 | 133 | 9.6 | |
| Oil receiver pipe No.1 at Transmission case | 17 | 173 | 13 | |
| Oil receiver pipe No.2 at Transmission case | 17 | 173 | 13 | |
| Clutch tube bracket at Transmission case | 17 | 173 | 13 | |
| Reverse idler gear shaft bolt at Transmission case | 30 | 306 | 22 | |
| Transmission clutch hub No.3 gear shift fork shaft at input shaft | 24 | 245 | 18 | |
| Manual transmission output rear set nut at Output shaft | 123 | 1,254 | 91 | |
| Drain plug sub-assembly at Transmission case | 49 | 500 | 36 | |
| Manual transmission filler plug at Transmission case | 49 | 500 | 36 | |
| Back up light switch assembly at Transmission case | 40 | 408 | 30 | |
| Manual Transmission breather plug at Transmission case | 49 | 500 | 36 | |
| Lock ball assembly No.1 at Transmission case | 29 | 296 | 21 | |
| Speedometer driven gear sub-assembly set bolt | 5.5 | 56 | 48 in.*lbf | |
| Selecting bellcrank support at Selecting bellcrank No.2 plate washer | 12 | 122 | 9 | |
| Front differential ring gear at Front differential case | 106 | 1,081 | 78 | |