LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma X-Runner >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Audio/Visual) >> Multi-Display >> Installation

Section 34 (Audio/Visual): Multi-Display: Installation

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MULTI DISPLAY 
  2. INSTALL ACCESSORY METER ASSEMBLY 
  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER 
  5. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 
  6. INSTALL INSTRUMENT PANEL FINISH PLATE 
  7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2 
  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1 
  9. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE 
  10. INSTALL STEERING COLUMN COVER 
  11. ADJUST SPIRAL CABLE (See  INSPECTION  ) 
  12. INSTALL STEERING WHEEL ASSEMBLY (See  INSTALLATION  ) 
  13. INSTALL STEERING PAD (See  INSTALLATION  ) 
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  15. PERFORM SYSTEM INITIALIZE (See  INSTALLATION  ) 
  16. INSPECT STEERING PAD (See step 5 under  INSTALLATION  ) 
  17. INSPECT SRS WARNING LIGHT (See step 7 under  INSTALLATION  ) 
scientia non olet · About LEMON Manuals