LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma X-Runner >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Removal

Combination Meter: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT FLOOR FOOTREST (See  FRONT FLOOR FOOTREST  ) 
  3. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) (See  REMOVAL  ) 
  4. REMOVE FRONT DOOR SCUFF PLATE LH (for Access Cab) (See  REMOVAL  ) 
  5. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) (See  REMOVAL  ) 
  6. REMOVE COWL SIDE TRIM BOARD LH (for Regular Cab) (See  REMOVAL  ) 
  7. REMOVE COWL SIDE TRIM BOARD LH (for Access Cab) (See  REMOVAL  ) 
  8. REMOVE COWL SIDE TRIM BOARD LH (for Double Cab) (See  REMOVAL  ) 
  9. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) (See  REMOVAL  ) 
  10. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) (See  REMOVAL  ) 
  11. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (See  DISASSEMBLY  ) 
  12. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (See  REMOVAL  ) 
  13. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  14. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws and the combination meter assembly.
    2. Disconnect the 2 connectors.
      Fig 1: Removing Combination Meter Assembly Screws
      G04412686Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals