Fuel Pressure Regulator: Installation

INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
1. Install the vacuum hose.
2. Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure regulator.
3. Install the fuel pressure regulator with the 2 bolts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
CONNECT NO.2 FUEL PIPE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER ASSEMBLY (See INSTALLATION )
INSTALL V-BANK COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
CHECK FOR FUEL LEAKAGE