LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Control System) >> Knock Sensor >> Removal

Knock Sensor: Removal

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. PREVENT GASOLINE FROM SPILLING OUT 
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  4. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE COWL TOP PANEL OUTER (See  ON-VEHICLE INSPECTION  ) 
  6. REMOVE V-BANK COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE (See  REMOVAL  ) 
  8. REMOVE INTAKE AIR SURGE TANK (See  REMOVAL  ) 
  9. REMOVE INTAKE MANIFOLD 
  10. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
    2. Remove the 2 bolts and 2 knock control sensors.
      Fig 1: Removing Knock Control Sensor
      G04375254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals