LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Control System) >> ECM >> Removal

Section 4 (Engine Control System): ECM: Removal

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE RH (See  REMOVAL  ) 
  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See  REMOVAL  ) 
  4. REMOVE INSTRUMENT PANEL UNDER COVER SUBASSEMBLY NO.2 (See  REMOVAL  ) 
  5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH (See  REMOVAL  ) 
  6. REMOVE ECM 
    1. Disconnect the 5 connectors from the ECM.
    2. Remove the 2 nuts, bolt and ECM.
    3. Remove the 2 screws to separate the ECM bracket from the ECM.
    4. Remove the 2 screws to separate the ECM bracket No. 2 from the ECM.
      Fig 1: Removing ECM
      G04375263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals