Engine Control System (2TR-FE): ECM: Removal

NOTE: Perform REGISTRATION (VIN registration) when replacing the ECM (see REGISTRATION ).

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL SUBASSEMBLY LOWER RH (See REMOVAL )
REMOVE ECM
1. Disconnect the 4 connectors.
2. Remove the 2 bolts and nut, then remove the ECM.
  
  Fig 1: Removing ECM With Nuts & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET
1. Remove the 3 screws, then remove the ECM bracket.
  
  Fig 2: Removing ECM Bracket With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET NO.2
1. Remove the 2 screws, then remove the ECM bracket No. 2.
  
  Fig 3: Removing ECM Bracket No. 2 With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002