LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Tacoma Base, 4D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Starting System) >> Entry And Start System >> Starter Relay Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT 
    1. Delete the DTCs (See DATA LIST / ACTIVE TEST ).
    2. Check for DTCs again.

      HINT:

      If the engine does not start, check for DTC B2273, B2275, B2278, B2284, B2285, B2287, B2288 and B2289. (For details, see the "DTC check and clear" See DTC CHECK / CLEAR .)

      OK: 

      No DTC is output. 

    NG: GO TO DTC CHART 

    OK: GO TO CRANKING HOLDING FUNCTION CIRCUIT